What is induction heat treating?
About induction heat treating, how much do you know? And what is induction heat treating equipment? And how to choose the frequency of induction heat treating equipment?Here we will tell you.
Overall heat treating is one process of metal heat treating, which is the overall heating of the work piece, and then cooling at an appropriate rate to change the overall mechanical properties.Steel heat treating has four basic process of annealing, quenching and tempering, normalizing.
The frequency selection of induction heat treating equipment: According to the heat treating and heating layer depth, we will choose different frequency.
High frequency (10KHZ above ): The depth of the heating is 0.5-2.5mm, generally used for small and medium parts heating, such as small module gear and small shaft parts.
The intermediate frequency (1~10KHZ) :Heating depth is 2-10mm, which is generally used for the heating of the gear with large diameter and large and medium modulus.
Frequency (50Hz) :The hardened layer depth is 10-20mm, generally used for diathermy of parts of large size and large diameter parts (diameter & Oslash; more than 300mm, such as roller and so on) .
This news is from Forever Furnace-steel ball production line producer.If you want to know more about Induction heating system,please contact us.
Post time: 06-01-2016