Phone: +86-13303078975

The introduction of the billet induction heating furnace

The introduction of the billet induction heating furnace

With the continuous improvement of the requirements for the quality of steel products, the requirements for the temperature system of billet induction heating furnace are more strict. In view of the particularity of the special billet heating production process, the heating system for different metal parts is developed. Yuatuo continuous to test for different material steel billet to analysis the internal structure changes and laws and eliminate defects to improve product quality of billet induction heating furnace.

Equipped with high level automatic control system, Yuantuo billet induction heating furnace is different from old heating method. Our machine is more suitable for large lot of the same size heating with high output. In addition, the improvement of automation has reduced the requirement for operators professional skills. The problems to be solved in the billet induction heating furnace are to improve and stabilize the quality of the products and to improve the use efficiency of the billet induction heater so as to achieve the purpose of the most economical production and operation. In addition, the automatic operation can be realized in the complex process of human incompetence or the situation that people can’t be near. In particular, it can be free of the heavy manual labor. It is difficult for people to complete the continuous production links in a short time, and the PLC automatic control process solves this difficult point, so that the process can be solved. The continuous production is realized, thus greatly improving the production efficiency, increasing the output of machine shop and increasing the scale of production.

http://www.hy-inductionheater.com/products/induction-billet-heating.html

The non-contact temperature measuring device (infrared thermometer) is making use of the thermal principle that the infrared radiation produced by the billet in the heating to measure the temperature of the workpiece. It is installed in the inlet of induction heater and water cooling section to realize the monitoring of the temperature control of the workpiece. The detection element is the “eyes” of the automatic control system of the medium frequency billet induction heating furnace. The measuring element gives the measured value or signal in the case of unmanned interference. In the application of billet induction heater, the detection elements usually include hot metal detectors, photoelectric switches, encoders, pressure sensors and so on.

Promoting scientific and technological innovation and developing low carbon economy is the focus of this year’s production of billet induction heating furnace. We will intensify the efforts to guide and propagate the new product research and development and the introduction of new technologies, continue to carry out the promotion of quality reliable products, actively participate in the formulation and revision of international standards and national standards, and further strengthen technical exchanges both at home and abroad to promote faster development of the industry.

http://www.hy-inductionheater.com/

Overseas manager: Tom Wang

Email:tom@foreverfurnace.com

Phone: 0086-13303078975(whatsapp, wechat,line)

Specialist of induction heating equipment and system in China; Glad to be your business partner in induction heating field.


Post time: 05-19-2018