Steel tube hardening and tempering furnace,more energy saving

Steel tube hardening and tempering furnace,more energy saving

The continuous hardening and tempering furnace of steel tube is the key equipment to realize the heat treatment process of steel tube. Whether the steel tube mechanical properties, physical properties, chemical properties and service life can reach the desired effect depends on the performance of the hardening and tempering furnace. That is, the heating and thermal insulation performance, so the heating and thermal insulation of the steel tube hardening and tempering furnace is very important.

Steel tube hardening and tempering furnace parts and process flow:

A new type of full-automatic continuous hardening and tempering furnace for steel tubes is developed, including feeding table, induction heating coils, infrared thermometer, discharging platform and console system. A number of continuous rotating rollers are set for the feeding device, induction heater and discharging device. The reducer drives the above rollers to rotate continuously through the chain drive, so that the steel tubes on the roller are constantly moving forward,

So there is no fixed contact between the workpiece and the roll shaft, and with continuous steel tube hardening and tempering furnace, the steel tube will be heated with uniform temperature and water spraying. After hea t treatment, the steel tube will not deform or bend. At the same time, because the roller in the furnace is always rotated in the induction heating furnace, the heat loss is relatively small, and the furnace has high thermal efficiency. In addition, the material loading and discharging of the tube hardening and tempering furnace is controlled by the cylinder through infrared sensor. It does not need manual push, greatly reduces the labor intensity and improves the labor efficiency; the induction heating furnace can effectively improve the heating temperature precision of the workpiece and reduce the energy consumption.

The steel tube continuous hardening and tempering furnace has some other features besides the energy conservation mentioned above. The machine can not only used for tube hardening and tempering but also annealing or normalizing process. When do annealing for the tube, user can choose through annealing or local annealing. With load design, the success rate of equipment startup is over 99%.

The steel tube hardening and tempering furnace is mainly used for the surface beauty of the processed parts, and does not produce oxidation skin and decarburization. The hardness of the products is uniform. It is especially suitable for the hardening and tempering treatment of stainless steel, copper alloy and other alloy super long pipes.

Overseas manager: Tom Wang

Email:tom@foreverfurnace.com

Phone: 0086-13303078975(whatsapp, wechat,line)

Specialist of induction heating equipment and system in China; Glad to be your business partner in induction heating field.