Phone: +86-13303078975

Safety Production of Steel Bars Induction Heating Furnace

The failure of steel bar induction heating furnace and safety accidents in production are mainly due to negligence Inadequate preventive measures. Strengthen the understanding of safety production and take corresponding preventive measures. Most accidents can be prevented. Now let’s see how to ensure the safety production of steel bar induction heating furnace.

Understand the characteristics of steel bar induction heating furnace.

Understand the operation method, maintenance essentials, production capacity and application scope of steel bar induction heating furnace, and be familiar with all controllers of the equipment The function of the alarm device, at the same time, be sure to carefully read the “warning” instructions, and note that the steel electric induction steel bar heating furnace will have safety accidents under low pressure, high temperature and other conditions.

steel-bar-heating-furnace-for-forging

The steel bar heating furnace shall be familiar with the operating procedures of steel induction heating furnace.

The safe production of steel bar induction heating furnace depends on the careful operation of the operator and the mastery of the technical performance of the induction heating equipment. Therefore, the operator should be familiar with and master the operation requirements of the Induction Heating Equipment. It is the responsibility of each operator to discuss the potential accidents and preventive measures at the work site with the manager. In order to ensure safe operation, the common sense of steel bar induction heating furnace operation must be familiar with and fully observed.

Inspection before starting the steel bar induction heating furnace.

Before starting the steel bar induction heating furnace, it is necessary to confirm that the protective device is safe and undamaged, and check whether the circuit system is normal Check whether there is leakage, whether all parts of the equipment are fastened, installed, etc., to ensure that the steel bar induction heating furnace is restarted without any hidden danger.

http://www.hy-inductionheater.com/case/induction-bar-heater.html

Precautions during maintenance.

1. Cut off the wire. Before any maintenance work is carried out on the steel bar induction heating furnace and any equipment, the power supply of all electrical controllers must be cut off.

2. Hang warning signs. When repairing the steel bar induction heating furnace, be sure to notify the operators and nearby employees, and hang warning signs with the words “maintenance in progress” to prevent others from starting the steel bar induction heating furnace during the maintenance, otherwise it will cause incalculable safety accidents.

 

750质量英文版 001_副本http://www.hy-inductionheater.com/products/long-bar-hardening-and-tempering-production-line.htmlcustomercompany

http://www.hy-inductionheater.com/

Overseas manager: Tom Wang

Email:tom@foreverfurnace.com

Phone: 0086-13303078975(whatsapp, wechat,line)

Specialist of  bar heat treatment furnace in China; Glad to be your business partner in induction heating field.


Post time: 12-01-2022